Roofs

Why Domus Roofs?

• Because there is maximum heat dispersion from the roof
• Different panels for each specific need
• To waterproof
• To insulate
• To ventilate
• Moisture resistant
• Constant performance over time

Types:

High-density, single-grooved undertile panel with a tile pitch of 31.5 to 33.5 cm, with possible rebate on 2 or 4 sides. Standard dimensions: 1330x1000 mm. Standard thicknesses: 40-50-60-75-100-120-150 mm

High-density undertile panel, grooved on both sides of the panel to allow micro-ventilation and facilitate water infiltration, with rebate on 2 or 4 sides. Standard dimensions: 1330x1000 mm. Standard thicknesses: 40-50-60-75-100-120-150 mm

High-density undertile panel for ventilated roofs: allows for the support of the tile and, at the same time, greater air circulation and passage, with rebate on 2 or 4 sides. Measurements: 660x1000 mm. Thicknesses: 65-75-90-115-140-165 mm (30 mm foot)

High-density shaped panel for roof tile, with 2- or 4-sided rebate. Dimensions: 1330x1000 mm. Thicknesses: 75-100-120-150 (tile pitch 200 mm)

Prefabricated neopor graphite insulation panel for underlayment, laminated with OSB and, if desired, with a special aluminium sheet (optional) for the construction of ventilated pitched roofs with very high winter and summer thermal performance. Format: 1200x600 mm. Thicknesses: 122-142-162 mm Air gap height: 50 mm

Extruded panel with laminated slated sheathing. Different sizes

Plain extruded XPS panel with sharp edges. Dimensions 1250x600 mm. Different thicknesses